ESP32 Cheap Yellow Display (CYD) Enclosure - USB Ports Only
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @mdzi's enclosure to close of the peripheral port openings for a cleaner look when not using them.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 763
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Remix of the enclosure designed by @mdzi to close of the side and bottom peripheral ports (except the USB ports) for a cleaner look when not using external IO devices. Huge thanks to @mdzi for providing STEP files which made remixing this much easier.
For further remixing, I've provided STEP files and a link to my Onshape document.
Original description by @mzdi for reference:
Remix of the enclosure designed by @mdkendall for the ESP32 Cheap Yellow Display (ESP32-2432S028R) found on Aliexpress & similar sites.
Model adjusted for the USB-C board version, which does have slight variations of the connector positions (especially mounting holes & USB-C connector).
Note: Self-tapping version only
Print settings
- Material: PETG
- PLA should be fine as well, probably with less flex on the buttons. The board gets warm on the back, but I don't think it's that warm to melt PLA.
- 0.4mm nozzle
- 0.2mm layer height
- 3 walls
- 2 is probably fine as well
- 15% infill or more
Required hardware
- 4x M3x6 Socket Head screw (self-taps into plastic)