MP Mini Delta V2 Bed Alignement Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had some poor print quality on my MPMDv2, turned out the bed was sliding around from the nozzle movements. Print…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I had some poor print quality on my MPMDv2, turned out the bed was sliding around from the nozzle movements.
Print these to put push back against these movements.
They are mounted under the swivel lock that hold the bed down. Make sure they push the bed from the sides and aren't stuck under it. Test that the 3 buttons under the bed clicks properly when you bredd she bed in the probe spots after mounting everything back together.
Print Settings
Printer Brand:
Monoprice
Printer:
Mini Delta
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
100%
Filament: Prima Easyprint PLA Blue
Notes:
Use the pre-supported version with 0.2mm layers and the supports should be easy to break off, maybe there is oozing you need to put in some places.
Category: 3D Printer Parts