Bracket to fix Klipper Chroma Module (KCM) to TronXY XY-100 / iMakr STARTT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket to allow the fitting of the Coprint KCM in place of the screen on a TronXY XY-100 or iMakr STARTT
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
As part of our plan to upgrade our TronXY XY-100 (also sold as iMakr STARTT) printer with a CoPrint system it was necessary to mount the Klipper Chroma Module (KCM) onto the printer. This bracket is designed to fit where the LCD screen and control panel used to be (because they're removed when fitting the Klipper upgrade bracket) and fix the KCM in place. It uses M3 hardware and can reuse bolts and nuts removed from the printer as part of the upgrade
Printing recommendations
I suggest printing this in PETg or other slightly flexible filament so that the spring clips that hold the KCM secure have enough flex and don't break. It can be printed either laying flat on it's back or on it's side, flat removes the need for any supports but relies on tall columns being strong, side removes the need for tall columns but relies on bridges and supports being good.