1 / 8
Dust-collection adapter - Karcher Vacuum to Makita Mitre Saw — zdjęcie 1
1 / 8

Dust-collection adapter - Karcher Vacuum to Makita Mitre Saw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

⌀37,8mm (Mitre saw side) ⌀35,7mm (Vacuum side)

Ocena
0 / 5
Polubienia
10
Pobrania
38
Wydruki
0
Wyświetlenia
354
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Model tested with :

  • a Karcher WD3S (Vacuum)

    • Fits all Karcher WD3/KWD3 models equipped with the “Suction hose with connection piece” as shown in the last picture above

  • and a Makita LS0816F (Mitre Saw)

    • Might fit with : LS1110F, LS0815FL, LH1201FL (let me know if it does or not!)

Print recommendations : 

  • Material : PETG

  • Layer height : 0,3mm

  • Brims : Recommended

  • Perimeters : 4

  • infill : 15%

Details : 

  • Printing time : 1h30

  • Filament used (g) : 44,51

Safety note :

Inhaling sawdust can severely harm your health. I hope this model helps you use your mitre saw more safely. It does not replace an external ventilation and should ideally be used in a well-ventilated area!

Let me know if you notice any modification that could help!

Tagi