Majacraft Spinning Wheel Bobbin 125mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bobbin intended for use with Majacraft spinning wheels.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What is it?
This is similar to a large size bobbin for Majacraft spinning wheels. Most of the dimensions should be similar enough to work with their wheels.
Previous iterations of this had the bobbin made in 2 or 3 parts which meant that the bobbins were more prone to shearing. This design requires 2 of the axle part printed so the layer lines run the length of the axle inserted into the socket. If your printer's tolerances are similar to mine you should be able to friction fit the parts together without glue. It may require a bit of force to do.
How do I print it?
Print two of the spindle halves (laying flat on the print bed). Depending on your printer you may or may not need supports or a brim.
Print two plates. No brim or supports are required for this part.
How was this designed?
This was made in Open SCAD. The kumiko pattern was made using froqstar's kumiko patterns script for Open SCAD.
Please note the photo is of a test print where one of the plates not included here and an earlier version of the axle.