Lego compatible digits and letters, Latin and Cyrillic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the wonderful https://github.com/cfinke/LEGO.scad these letters are designed to be compatible with Lego bricks.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
The STL files are built with the 1.03 stud_rescale option which resulted in the best fit on my Prusa Core One.
To be able to generate new STL files using the scad files will require my modifications to the LEGO.scad module. I will try to submit those to the original project so they can be included. If desired reach out to me and I'll send you my copy.
One of my goals was to avoid the partial studs seen in some similar models. Unfortunately I was unable to do so. The smallest partial studs can be cut away using a 'negative' volume' in the slicer or after printing.
If you have an idea how to achieve this please reach out to me.
I have printed these in PLA with just 10% infill (support Cubic) and they feel strong enough.