1 / 3
Scale for Roxon Companion accepts Ferro Rod (Tortoise Firefly 50mm) — zdjęcie 1
1 / 3

Scale for Roxon Companion accepts Ferro Rod (Tortoise Firefly 50mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tooth pick removed, Ferro rod added.

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
221
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Roxon Companion scale (clip side) that takes the 50mm long “Tortoise” brand “Firefly” ferro rods for the victorinox swiss army knife. Includes a small spring for retention so the rod fits smoothly and doesn't fall out.

Must be printed at .10mm layer height to avoid having to use supports.

The Firefly sticks are meant to go on the opposite side to blend in with the scale on the victorinox, so for the Roxon, I just used a razor blade to shave down the plastic head to match the curve of the Roxon scale. It wasn't hard. 

Link to Ferro rods:

https://www.amazon.com/dp/B08YJSH185?ref=ppx_yo2ov_dt_b_fed_asin_title

Tagi