1 / 8
Estancia #568 TCP Pinnochia's Glove — zdjęcie 1
1 / 8

Estancia #568 TCP Pinnochia's Glove

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model of NN Mode Selector Claw that can be used during competition. Design for BEST Robotics 3D Challenge.

Ocena
0 / 5
Polubienia
3
Pobrania
3
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Teacher Contact Name: Jaime Silva (Model created by a student)

School: Estancia High School #568

Best Hub: NMBEST Las Cruces, NM

A. Function and Purpose of the Part:

For our submission for the 3D printing challenge we will be submitting our claw. Our claw is multifunctional with two main capabilities. The first purpose of our claw is utilizing it to turn the neural net selector by choosing pattern A, B, or C. This is an incredibly important and integral part of our scoring. Choosing a pattern with all 5 tiles in the correct place on the neural net mode selector will earn us 100+ points. Ultimately, our goal will to earn 150 points, by selecting pattern C. The second function of our claw will be for tightening and unraveling the string for the neural network tile delivery system. 

B. How it would benefit a BEST Robot

This part is a vital benefit to our BEST robot (Pinnochia). It helps us select the patterns which allows us to score more points on one of the highest point tasks available, while still allowing us to adjust the tile delivery system. Unlike other opponents, our claw allows us to independently operate our tile delivery system. This saves us time on our run as well as creating an easier program with less controls to memorize. BEST robotics only gives teams certain building materials, and the ability to 3D print gives us the option to use additional parts that other teams may not be able to use for certain tasks. 

C. Design Process Notes

Throughout the entire design and competition process, this 3D model has undergone multiple iterations. At first, our main building team wanted a cylindrical body with teeth similar to a gear and a hand shaped claw at the end. For each prototype, I printed with 10% infill to test so we could ensure it was the right size and that it fit correctly over the mode selector handle (PVC T). This saved us time when trying different models and sizes until we had found the correct final dimensions. The initial function for the claw was to turn the Neural Network Mode Selector and have the opportunity to use the gear as a separate function. Our team wanted the claw to look like a puppet hand since our robot is modeled after Pinocchio. With our first print, the hand was too small to grip the PVC T and did not fit onto the motor shaft. We also made the decision that it would not need to have a gear body. We changed the model to a U shape as opposed to the hand and adapted it to a simple cylindrical body. It took a couple of tries to get the perfect size to fit around the PVC T in the actual model. However, we still were unable to get the claw to fit tightly around the motor shaft. We had to place a semicircle in the cylindrical hole for it to fit correctly over the motor shaft, but it was still too big. We calculated the exact circumference of the motor shaft and scaled the full model down to 77% of its original size. We then tested the final claw on our mock course. It stayed on the motor shaft and easily selected the desired pattern. Once we had the final claw,  we printed it with 60% infill and we were ready for the first competition. 

At state competition, we earned second place overall, which got us into regionals. During state competition, there was one problem that we came across. The Neural Network Mode Selector was behind a 1x4 wooden edge, so when we tried to reach the box there was an extra ½” stopping us. The box was also not affixed to the ground so anytime we tried to turn the selector the box moved. Additionally, the turning mechanism was not true so when it was turned, it did not sit nicely in the viewing window. 

When we got back, the building team started making adjustments to the robot. For the claw adjustments, the building team wanted my 3D printing team to elongate the claw, to reach the mode selector properly. They also added a tile delivery system that required our claw to become multifaceted. We needed to make an indention to the middle of the original claw with a hole in the middle of that indention and slightly extend the U part. This hole would allow the string to be tied on to the claw and permanently attach it there. The indentation is so the string can wrap around and stay secure without having the string slide off the claw.  That modification was easy to program, but it did take multiple tries to get it perfect. Sooner or later, it was getting printed. After it was done printing, we tested the claw. The string ended up getting wound around the motor shaft. The building team needed the bottom of the claw longer with a full circle that transitioned into a  semi-circle that would slide over the motor shaft and correctly line up with the motor mount. After we printed the claw with this modification, we discovered that we needed to add a smaller cylinder just below the gap so that the string would wrap around the divot. This ensured the string wouldn’t scrape against the motor brackets. With this modification, the string would be fully safe from tearing.

D. Print Settings

Print Settings: 

Prototype Claw - Printed on a MakerBot Sketch

Filament Type: PLA

Infill %: 10%

Supports: Yes, 60% angle 

Orientation: Upright

 

Final Claw - Printed on a MakerBot Sketch

Filament Type: PLA

Infill: 60%

Supports: Yes, 60% angle

Orientation: Upright 

Note: You will need to scale the original stl file to 77% for it to be the exact model we used and fit within the TCP parameters. 

 

E. School, BEST team number and name, and BEST HUB

School: Estancia High School

Best team number: 568

BEST HUB: NMBEST Las Cruces, New Mexico

Tagi