MK3/S X Axis Motor Cable Support / Strain Relief (remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strengthened remix of 3D-Fuchs' cable guide with longer support.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 186
- Wydruki
- 11
- Wyświetlenia
- 942
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A strengthened remix of 3D-Fuchs' cable guide with longer support.
I found the original support too short so I remixed to lengthen it. While I was at it, I decided to strengthen the support to reduce flex, and also made the mount thicker so a spare M3x12mm bolt can be used. The original required a shorter bolt than I could find in my spare parts (6 or 8mm). Since there are several 12mm spares in both printer and MMU spare parts I decided to use it.
The bolt head recess is also an easy print style that requires no supports.
V2 adds a small rim for the zip tie.
Checkout @Carrier_224007's remix for an MK4 version:
https://www.printables.com/model/502616-prusa-mk4-cable-support-x-axis