I <3 FUMES - UNIVERSAL ACTIVATED CARBON FILTER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Activated carbon filter for 5020FAN. You can place it anywhere you like. A base station for it will follow soon.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I <3 FUMES
Air fresh activated carbon filter for 5020 FAN. You can place it anywhere you like. A Base station for it will follow soon.
The 5020 Fan sucks the air near the hotbed and also by example by ASA produced toxic fumes to filter them. The benefit of this way instead of an filter outside ist, that it uses the hot air from the build volume and gives also the hot air back instead of cold fresh air that would cause problems and warping while printing by example ASA
I printed it out of ASA so its heat resistant and reliable.
BOM
1 x FAN
1 x activated carbon pellets
1 x cable to adjust the length of the Fan connector cable
1 x soldering iron or another way to connect cables
For SovolSV08 you can see where I have connected the fan on the board. Yuo can use any 24V - 2 pin port on your board that can be used for a fan.