1 / 1
Nanoleaf triangle shapes clips
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bunch of different clips to easily screw Nanoleaf Triangle Shapes to a wall, connecting the shapes in several ways
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
These clips are to hang Nanoleaf Triangle Shapes to the wall with screws. Print them in the color of your Nanoleaf panels, I have the black ones.
Screw holes are 3.5 mm diameter, with a chamfer of 0.8 mm (outer circle of the chamfer is about 7.5 mm).
Clip variants:
- At the tip of a single panel with screws away from the panel. No supports needed.
- Same, but with the screw holes next to the tip of the panel (variant B). No supports needed.
- Connecting two panels at the tips. No supports needed.
- Two panels, where one is halfway the other (see my photo, on the right side). Supports needed for the overhanging part.
- Same, but mirrored. Same support needed.