oppo F1s case RWBY Pyrrha logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
heres a phone case for an oppo f1s with Pyrrhas logo from rwbyits made for dual colour printing and works with a…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
heres a phone case for an oppo f1s with Pyrrhas logo from rwby its made for dual colour printing and works with a single nozzle if you print the logo first then the case around it
Print Settings
Printer:
HE3D I3 Prusa i3 clone
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
15
Notes:
in your slicer remove the main case file and keep the logo
print the logo with a 0.3mm bottom layer height, it should have 1 layer
dont remove it from the bed
open the file again an remove the logo pieces and print the main case
print the first layer a bit hot so the logo and case fuse together properly
print at 0.3mm bottom layer height and 0.1mm for the rest
no supports so it prints over the logo (don't cross perimeters might help here but i didn't have a problem without it)
honeycomb infill
4 top and bottom layers
4 perimiters
How I Designed This
i got the phone case file
imported an svg for the logo
extruded the logo 0.3mm to match the bottom layer height
placed it where i want on the case
duplicated it so there are 2 logos in the same spot (it will make sense)
used one of the logos to cut into the main case, it removes it while doing it so thats why we have the 2nd logo
now export into your slicer and split so the parts are separate
123d design wasnt cooperating and the file didnt import into my slicer so i had to send it to meshmixer then export using that, not sure what the problem was but this worked
Category: Mobile Phone