1 / 5
Hex Key Fob enclosure (HID Type or similar) — zdjęcie 1
1 / 5

Hex Key Fob enclosure (HID Type or similar)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement enclosure for nfc keyfob

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

I accidentally damaged my key fob key-ring eyelet , so I designed a dedicated enclosure for the fob. It works well and can be closed permanently using super glue, 3D Gloop, or a similar adhesive. You can also glue the fob itself inside the enclosure if needed.

If you want the smallest possible size, you can cut away the remaining plastic from the original key fob before placing the electronics inside the new enclosure. Be very careful when doing this damaging or pulling apart the NFC coil or chip will render the fob unusable.

For best results, I recommend gluing the case shut to ensure the fob cannot fall out or be lost.

Tagi