Ikea CITRONHAJ ald Aldi Spice jar organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
made longer but all printable on a Prusa Mini (180³ mm)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Print Orientation is shown in the third model.
Just print one top part and as many middle parts, as you need, and mirror every other part to make use of the connector things when using more than 3 segments. You don't need the bottom part, if you put it in a drawer like I did. I put 3 of these in my drawer, measured how much space I had left and took the Model without the connector pin from the original Post and scaled it down along the Y-Axis to fit perfectly in that space, giving extra space for the little orange jars at the top.
I just used some leftover PLA, it doesn't really matter, but I would print in white so you see what's in the Jar