Anti-vibration feet for SuperSilent TC Compressor (or any pipe 20mm pipe frame)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple anti-vibration foot for air compressor. Attaches to the pipe frame of 20mm in diameter. Printed with TPU
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a simple set of feet for an air compressor--in my case SuperSilent TC which comes with a set of horrible plastic feet that are always broken in shipping. They will fit any pipe frame with 20mm dimeter.
These feet need to be printed with TPU, for they will need to be flexible in order to swap it onto the frame. I recommend 0.6mm nozzle, Polymaker TPU95, 65% Gyroid infill. I did not make any efforts to make them pretty, but you can add fuzzy skin to hide layer lines….or actually tune your profile and use dry filament for better looking result :)
I used crazy glue to secure them to compressor; it says stationary so it works well for me, but you may need to look into stronger adhesives if you plan on moving it.