1 / 2
Rear wing holder bracket for Audi Quattro 1/10 shell
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for the Audi Quattro Group B rally Shell Rear Wing
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
x6 M3x6mm countersunk flathead hex screws needed.
Nilon PA filament recommended, or anything not too brittle.
I used ppacf.