1 / 1
Gridfinity Alto Saxophone Mouthpiece stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple stand for an Alto Saxophone Mouthpiece
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a stand for an alto saxophone mouthpiece that fit into a gridfinity base. I considered these but liked the peg design from these. My version was inspired by these two models but I actually designed it from scratch. While testing it I came up with a few variants:
- Magnet size - I have STLs for 6x2mm (Gridfinity spec) or 6x3mm (Voron spec). In the fusion file you can modify the parameter for magnet diameter and depth
- Bin wall. I found it useful to add a short wall around the base so I can put my mouthpiece cap on the stand without it sliding around. If you don't want the wall you can modify the fusion file by selecting the “Bin Wall” group of features for the wall and suppressing it. There are parameters for wall height and thickness