SG Go Tek Lok Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 piece mounting solution to put your SG GO shot timer on a Tek Lok mount. The timer also easily removes for charging.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 3 piece solution to mount a SG GO shot timer to a Tek Lok mount. The 3 pieces connect via 2 M2 screws and thread into nuts. I made the tolerances very tight so you may need to gently persuade the nuts into the spots for them. You will need the following hardware:
2 x M2x12 screws
2 x M2 nuts
Once attached, put your Tek Lok mounting pieces in the opposite direction and attach to the Tek Lok mount. Your SG GO will firmly lock into place but can be easily removed just by pulling in the opposite direction.
11/20/2025 - I added a cover / mount for a magnet. I haven't tested this.
100% infill / 0.12 layer height / PLA+