🚗🥤 Self-Levelling Cup Holder for car mount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
1,63 € – 2,00 € netto (bez VAT)
Dla pliku: MOUNT LVL5cm L_0.2mm_PETG_MK3S_1h50m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,82 € netto (środek widełek).
- Masa podana przez autora
- 24 g
- Czas druku podany przez autora
- 1,83 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Print-in-place gyroscopic balance system and anti-vibration springs will protect your drink while driving.
- Ocena
- 4,333 / 5
- Polubienia
- 441
- Pobrania
- 1963
- Wydruki
- 3
- Wyświetlenia
- 14 772
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Info:
- inspired by great gyroscopic model from @phi.gl for stroller, I wanted to have it in the car :) Thanks for originil print!
- I used this ventilation connector shape from print by @icepick Designs (thank you too)
- I designed car vent mounts in the way, that the original stroller model print can be used also in the car (so you can reuse it, if you want it in the car and not on stroller anymore)
Variants of gyro circles:
- I have here exact original gyroscopic circle with inner diameter 7.5cm (small hole)
- then i remixed it, so the hole is bigger (8cm)
- then, if anyone needs that, i modelled also 2 adapters:
- from 8cm to 7.75cm
- from 8cm to 7.5cm
- so it is probably more convenient to print 8cm gyro circles variant and possibly print also 8cm to 7.5cm adapter, it is better than printing both huge gyro circles.
- then, if anyone needs that, i modelled also 2 adapters:
Dimensions summary:
- gyro circles variants:
- inner diameter 7.5cm (same as original) - small
- for smaller cups like Starbucks coffee
- inner diameter 8cm - bigger
- for this diameter you can print optionally also reducing adapter, 2 variants of them (just clip on the 8cm hole gyro circles):
- 8cm to 7.5cm
- 8cm to 7.75cm
- for this diameter you can print optionally also reducing adapter, 2 variants of them (just clip on the 8cm hole gyro circles):
- inner diameter 7.5cm (same as original) - small
Vent system mounting connectors:
- there are many cars, many shapes, many angles of vent system, so I have attached few models of mounts
- measure your car and try to pick correct one for you
Print instructions:
- see 3mf files
- basically recommending PETG, 5 diameters
Assembly:
- you need two M3 screws, at least 18mm (those will be hidden completly inside)
- you can still use 20mm or longer screws (the longer, the more will be visible on the other side)
Warning:
- check if your vent system can really hold heavy drink!
- So you do not break your vent system ledge!
- be careful while driving & drinking your non-alcoholic beverage
Happy printing and driving!