Central Line Clamp (EDUCATION)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Central Line Clamps
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was created to replace missing Central Line Clamps in our Simulation Labs.
The model takes inspiration from the most common clamp found on Central Line sets in our inventory; the main modification helps to improve its ability to be gripped.
Printing Notes & Recommendations:
15% infill with PLA has worked good for us, and allows the clamp to flex a little to get around the lines.
Multiple can be printed at once (we normally do a set of 3 or 6).
THIS MODEL WAS CREATED FOR EDUCATIONAL SIMULATION USE ONLY AND SHOULD NOT BE UTILIZED FOR MEDICAL REFERENCE OR USE.