Qidi Q2 Z-Rod Base Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover to prevent debris from falling into the holes around the Z-rods.
- Ocena
- 4,333 / 5
- Polubienia
- 56
- Pobrania
- 437
- Wydruki
- 3
- Wyświetlenia
- 1805
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple cover to prevent debris from falling into the holes around the Z-rods.
It should be printed in a heat resistant material. I printed them in ASA.
2025-12-27 v1.5
Thanks to Gleb Grigorian for making me aware of the forgotten screws and creating a remix.
I quickly added the modifications he made. I haven't measured it, just did a quick eye measuring and added the cutout.
I also uploaded the FreeCAD file while at it, should make it easy to modify the radius of the cutout if needed.
2025-12-27 v2.0
Did a quick measure of the remix so it wasn't just eye measurement.
Removed the connector, as they honestly was just annoying, and as Andrew Cureton pointed out, they aren't really needed. Instead I added some overlap.
IMPORTANT!
Remember to remove the covers before performing platform leveling. Thanks to @MartinSturm for pointing it out.