1 / 5
Magnet Wheel with Three Holes (TCP) #BESTRobotics2025 — zdjęcie 1
1 / 5

Magnet Wheel with Three Holes (TCP) #BESTRobotics2025

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bevel gear driven wheel that can house magnets to pick up true Factoids.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

Prusa Research 3D Printing National Challenge Entry #BESTRobotics2025

School: Martin's Mill ISD High School

Team: Martin's Mill ISD

Team #: 0215

Hub: Dallas BEST (TX)

Model Description

Function

          This particular 3D Model is a prototype of a Magnetic sorter. Its function is to pick out the correct factoids from the incorrect factoids using a magnetic wheel-type beveled gear to rotate and pick out up to 3 correct factoids at a time. Its unique structure aids it in being able to smoothly and precisely pick out the correct ones as efficiently as possible. The magnets are hosted inside of the three holes on the outermost layers of the wheel. The caved-in portions of the wheel are meant to host the ‘untrue’ factoids, dividing them from the ‘true’ factoids. 

Benefits in Relation to the BEST Robot

      This model benefits the robot by making it able to complete the tasks. Our robot is able to collect the factoids then, using the gear, separate the true factoids from the false factoids. In addition the use of 3D printing is important to this piece because it cuts weight and increases our ability to make reserve pieces for the off chance that something happens. Also the accuracy of the additive materials makes it where we grab an exact amount of true factoids instead of hoping we get what we are looking for.  

Design Process

    The model was designed in Fusion360 based on a wheel on a bucket wheel excavator front end under the specifications of the BEST Robotics TCP rules.

3D Print Settings

      This piece was printed using a Prusa. The 3D print was printed using Polylactic Acid (PLA). Total time 3.07h.

Tagi