Netzteilhalterung, Netzteilhalter, power supply mount für Colortrac L36ei Scanner an Canon TM 300 / 305
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Standard Digital File License
Netzteilhalterung, Netzteilhalter zur Montage des Netzteils des Colortrac L36ei Scanners am Canon TM 300 / TM 305 Großformatdrucker
Die Netzteilhalterung kann einfach mit zwei Schrauben am Gehäuse des Druckers befestigt werden und das Netzteil eingeschoben werden. So hängt das Netzteil nicht mehr am Kabel des Scanners, liegt nicht mehr am Boden herum oder schleift dort herum. Zur Montage einfach die zwei vorhandenen Gehäuseschrauben in der linken unteren Ecke auf der Rückseite des Druckers herausschrauben und gegen solche um die Stärke der Rückplatte der Halterung längeren Schrauben austauschen. Damit ist eine robuste Befestigung gewährleistet und trotzdem ein spurloser Rückbau möglich. Natürlich ist auch eine Montage mit doppelseitigem Klebeband möglich, aber im Grunde wesentlich umständlicher und nicht so belastbar.
Zur Montage werden 2 Schrauben und Schraubendreher oder doppelseitiges Klebeband benötigt.
Die Halterung wurde mit Netzteilen der Colortrac Scanner L36, L36e, L36ei, LM36 und den Plottern TM 300 und TM 305 ausprobiert. Bitte beachten Sie aber, dass es sich um keine Entwicklung des Herstellers handelt und der Hersteller möglicherweise die Abmessungen des Netzteils verändert haben kann, so dass die Passgenauigkeit der Halterung nicht mehr gegeben ist. Achten Sie zudem beim Druck auf einen richtig kalibrierten Drucker. Abweichungen können die Passgenauigkeit beeinträchtigen.
Als Material wird für die beste Stabilität ABS mit möglichst hohem Infill bis zu 100% empfohlen.
Power supply bracket for mounting the Colortrac L36ei scanner's power supply to the Canon TM 300 / TM 305 large-format printer.
The power supply bracket can be easily attached to the printer housing with two screws, and the power supply can then be inserted. This prevents the power supply from dangling from the scanner's cable, lying on the floor, or dragging around. To install, simply unscrew the two existing housing screws in the lower left corner on the back of the printer and replace them with screws that are longer by the thickness of the bracket's backplate. This ensures a robust mounting while still allowing for seamless removal. While mounting with double-sided adhesive tape is also possible, it is considerably more cumbersome and less durable.
Two screws and a screwdriver or double-sided adhesive tape are required for mounting.
The mount has been tested with power supplies from the Colortrac scanners L36, L36e, L36ei, and LM36, as well as the TM 300 and TM 305 plotters. Please note, however, that this is not a manufacturer's product and the manufacturer may have changed the power supply dimensions, potentially affecting the mount's fit. Also, ensure your printer is properly calibrated. Deviations can compromise the fit.
For optimal stability, ABS with a high infill (up to 100%) is recommended.