Mission Expression Pedal Bumpers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enhanced bumpers (feet) for Mission Expression Pedal (recommend TPU)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I purchased a used Mission Engineering expression pedal for my Helix, but it came with ony 2 of the rubber bumper/feet missing. Instead of buying replacements, I decided to create and print better bumpers from TPU rubber, as 2 bars instead of 4 round pieces. If your bumpers are worn, torn off, or missing, you can try these as a solution. You could also screw into PLA printed bars from underneath to make mounting to a pedal board easier, as they are a cheap, disposable part. If using screwing from bottom, the spacing witdth is 40mm and 200mm on center. Mine sits on a rubber mat to the right of my helix and it stays in place very well. Hopefully, this part can be of use to others out there.