Death whistle template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a death whistle for you to make everyone near you think you are a maniac.
- Ocena
- 3 / 5
- Polubienia
- 16
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 477
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lately I've gotten into death whistles and I've decided to make my own.
I based my design on this paper in case you want to learn more about it https://www.nature.com/articles/s44271-024-00157-7
You will find a basic design you can print and I have included a step file of the basic design in case you are using the PrusaSlicer and want a better quallity print.
Finally, I've included a STEP file with the internal surfaces of the whistle in case you want to make your own.
In the video below you can listen to the final design as well as all iterations I went through.
Printing settings:
Material: PETG
Nozzle temp: 240ºC (70ºC for first layer)
Buildplate temp: 70ºC
Layer height: 0.12mm (0.2mm for fist layer)
Infil density: 30%
Infil type: Cubic
Printing speed: 40mm/s
Infil speed: 50mm/s
Fan speed: 20%
Supports: Yes.
Skirt and/or Brim: No.
Orientation: Default.
Have fun!