Amiga Mean Well RT-50B Power Supply Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case will fit a Mean Well RT-50B power supply based on the same design as my PT-45B/PT-65B version. Both the…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case will fit a Mean Well RT-50B power supply based on the same design as my PT-45B/PT-65B version. Both the cable entry points are on the same side of the PSU making it a bit neater when sat on top of a desk.
Power switch used measures 19.5x13mm. It should be easy to find one that fits, just a search for rocker switch and check the cut-out requirements).
For the cable strain reliefs, the ones I used can usually be found on eBay/AliExpress (6.5mm inner hole size). You can see the one I used in the photos.
All the screw holes are countersunk so can be printed without supports.
Needs 4x M3 screws for the case (I used 8mm but the length here isn't too important), and 2x M3 x 6mm screws to mount the PSU. (NOTE: Be careful on what length screws you use to mount the PSU. If they are too long, they will hit the PCB inside the PSU).
Step files are also available. If you modify them into anything useful, please add them as a remix for others to use.
Category: Computer