1 / 2
CTC Prusa Y Bearing Block - Better fit for cable ties
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is not much of a major change, but after printing I found the small cable tie holes to be too small. This design…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is not much of a major change, but after printing I found the small cable tie holes to be too small. This design replaces the round holes with rectangular cut-outs sized for a 2.5mm wide cable tie. The cut outs at the top of the bracket has also been sized accordingly.
Category: 3D Printer Parts