Amiga 600 OLED Gotek USB disk drive emulator base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the original CrazyBob design to mount a USB floppy disk emulator inside your Amiga 600 without…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the originalCrazyBob design to mount a USB floppy disk emulator inside your Amiga 600 without having to modify your case. This version allows you to use a 0.91" OLED screen in place of the original 7-segment LED display.
The OLED display is held in place with a small retainer plate that slides into place, so no need for any glue, which also makes it easy to remove the display if required.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Post-Printing
Remove support material. If your printer does not print bridges well then you may need to file out the hole for the OLED screen, although the supports should help with that.
Category: Computer