1 / 1
Amiga Mean Well PSU Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple bracket to mount a Mean Well PT-45B or PT-65B power supply into an original Amiga PSU case.
The mounting bracket is the same size as the original PCB so should be a simple replacement. No need to use any glue, or cut any plastics.
Requires 4x M3.5 screws to fix the Mean Well PSU to the bracket.
Note: This will only fit a certain type of Amiga PSU case. The one I measured was from my original A600, but unfortunately I no longer have the specific model number. Obviously it will not fit in the slim A600 PSU or any other non standard case without modification.
Category: Computer