1 / 4
X-Sense XS01-WX Smoke Alarm Mount — zdjęcie 1
1 / 4

X-Sense XS01-WX Smoke Alarm Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall or ceiling mount for the X-Sense XS01-WX Smoke Alarm, created via 3D scanner.

Ocena
0 / 5
Polubienia
5
Pobrania
72
Wydruki
0
Wyświetlenia
256
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Open Community License v1

This is a 3D scan of the back mount for the X-Sense XS01-WX Smart Smoke Alarm. 

Update - Added a CAD reproduced version. I haven't tested the fit yet, but it should print much nicer than the scan. Second picture, without the foam tape, is the CAD version.

.stl is the original scan, after some joining and post processing of the point cloud. 

.3mf is lightly sliced to level the bottom and top, and fix some of the interior region that was covered by foam tape during the scan. The rectangle in the middle will have to have foam tape cut for that position, or not, it'll probably be fine without it.

You will probably still have to do a tiny amount of cleanup on the tabs that lock it in position with a hobby knife. The tolerances there are rather tight. 

Note: The 3D viewer shows the negative part modifier without opacity. You'll have to open it in a slicer to really see it.

Tagi