Combined Magnetic Top Cover Handle with Core ONE+ Ventilation Slide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A combination of both the slider and Core ONE+ update for the ventilation grille.
- Ocena
- 4,846 / 5
- Polubienia
- 61
- Pobrania
- 351
- Wydruki
- 12
- Wyświetlenia
- 1251
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For use with the original CORE One+ printhead cover right lever. Requires 6.4.0+ firmware. Make sure to flip the vent grille for this to work properly per the CORE One+ update instructions!
A drop in replacement for the slide from the original magnetic top cover vent, no extra parts required!
Made for if you want to manually close the ventilation grille, while retaining the automatic function.
Print information:
- Prusament PETG
- 0.20mm STRUCTURAL Profile
- Perimeters: 4 walls
- Infill: 15%, Gyroid
.bgcode supplied for reference only!
Due to a weird license clash, I can't link the referenced printable directly:
Prusa CORE One to CORE One+ Upgrade Community version
https://www.printables.com/model/1486513-prusa-core-one-to-core-one-upgrade-community-versi
Changes:
- v1 - Initial remix
- v2 - Flipped Open and arrow so they're correct. Ribs adjusted to not block vent when opened.