1 / 2
S25 Ultra Camera Cutouts for Spigen Liquid Air Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I didn't like how Spigen's cases for the S25 Ultra don't have individual cutouts anymore, so I designed these.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 710
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
I made this because I prefer cases with individual camera cutouts. It should be able to be pressed onto the cameras when the phone is in the case. It sits tight enough to not fall out.
When using a 0.4mm nozzle, make sure to enable “Detect Thin Walls” in the slicer, or it might leave out certain parts.
