USB C PD board case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic case for USB C PD trigger boards with switch adjustable voltage.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a basic push fit two piece case for USB C PD trigger boards that have switch adjustable voltage. This model has a small ledge inside and some clearance at the bottom so there is no need to clip the pins on the bottom of the board in order to make it fit. It will be a snug fit, as I didn't like the board wiggling around when I inserted or removed a USB plug, so you may want to scale it up a small amount, depending on your printer.
With a 0.4mm nozzle at 0.2mm layer height on a MK3S, the parts should have just enough interference for a friction fit.
I purchased my boards from: amazon.com/dp/B0F67HD7GK?ref=ppx_yo2ov_dt_b_fed_asin_title