RC Body Lexan Airbrush Stencils
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Airbrush Stencils for effects on 1/10 and 1/24 scale RC car lexan body shells
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 283
- Wydruki
- 0
- Wyświetlenia
- 1060
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- GNU General Public License v2.0
Took the designs from the storage box and turned them into airbrush stencils. Size is 180x100mm the same as BittyDesign stencils. The SCAD files are included for generating any other size stencil needed. There are a few patterns in the scad files that I didn't generate into stencils because I didn't think they would work for airbrushing but may be useful for other designs.
2025-12-17 - Added more hex variations
Hex_Giant_100x180.stlHex_Large_100x180.stl
Hex_Med_100x180.stl
Hex_Small_100x180.stl
Hex_Thick_100x180.stl
2025-12-01 - Added Vonoroni stencils with updated scad code
I printed these in PLA but just about anything will work. Stencils are generated at 1mm thick, scale to .2 or .4mm for better flexibility but make sure your bed mesh is accurate and may want to turn on ironing.
https://openscad.org/downloads.html