BattleTech Formation Stands with Card Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display BattleTech mechs in 4, 5, or 6 formations with card storage; friction-fit and magnet versions.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 330
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Public Domain
Version 2 Update
This update adds both friction-fit and magnet-ready versions for three BattleTech formations:
- 4-Mech Lance Formation
- 5-Mech Clan Star Formation
- 6-Mech ComStar Level II Formation
Also add a slope and finger hole to card slot to assist with removal of cards.
Supports
The card holder will need supports. I used a PETG interface layer to help with removal. If you don't use an interface layer, I would advise to ensure the finish is smooth to not damage your cards.
Magnet Version
- Designed for 15×1mm magnets
- Allows secure mounting and easy removal of miniatures
- Fit may vary based on printer tolerances and settings
- Scale change may help if the fit is too tight/loose
Friction-Fit Version
- No magnets required
- Fit may vary based on printer tolerances and settings
- Scale change may help if the fit is too tight/loose
Card Storage
- Space underneath the stand to store Alpha Strike cards and Pilot Cards
- Helps keep units and stats together during play or display
Optional Back Card (4-Mech Lance Formation Only)
If you'd like to add the back card shown in the photos, you can cut it from the retail box along the seams (example included below).
When I buy a retail box of a 5-Mech Clan Star Formation or 6-Mech ComStar Level II Formation I'll measure and add slots for those versions.