Pavoni Jolly single dosing filter holder

This thing replaces the front plate on a La Pavoni Jolly grinder to allow for directly collecting the grinds in a filter. It is in three parts, which might have to be modified individually. For example, the filter holder has a hole diameter of 57 mm, which works for Bialetti baskets, Pavoni filters with my funnel and the Pavoni Portalfilter (however it's not really designed for this weight). For other users, the radii will have to be adjusted. For this reason i have included the fusion files. If there is interest, i can also provide step files.

For the front plate, there are two alternatives. One is lightened a bit, but you can probably achieve something similar by varying the infill.

Please keep in mind that 3D-printed plastics are generally not food-safe and it.might be a good idea to coat the inside of the spout with something that is.

The filter on the assembled pictures is not included in this download. it is from this thing.

Update 04/2026:

• i have added he two files "faceplate angled spout.stl" and "angled spout.stl". With them, the spout has a 30° angle which should reduce the amount of coffee grounds that stay stuck inside

• 05/2026: countersunk the bottom screw deeper, so that the old one can be used without drilling.

Category: Kitchen & Dining