Fire extinguisher for the Bambulab A1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the brandwaechter24.de "Fire Cookie" for the Bambulab A1.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fire extinguisher for the Bambulab A1
A holder for the Brandwächter24 Fire Cookie for the Bambulab A1 that fits on the crossbar. The Cookie then sits above the power supply.
Printing and Assembly Instructions
Printing
The clip can be printed in place without support. I used a 0.4mm nozzle with fine settings (0.12mm layer height, 2 walls).
The holder can be printed with only minial support at the handle. I got better results with the 0.6mm nozzle and unsing also the fine settings (0.18 mm layer height) and reducing the support angle to 25 degrees.
For the ankor and arm I used three wall loops for additional strength. The starnobs are optional (if you do not want to use a wingnut).
Assembly
After printing everything, first insert the ankor in the upper part of the clip with the corresponding hole. Fold the clip around the crossbar and fasten the clip with the 2 M3x5mm screws.
Next the arm can be attached to the ankor with one M6x20mm hexhead screw and a wingnut or a nut with the 3D printed starnob.
Next the holder gets attached to the other end of the arm with the second M6x20mm hexhead screw.