BEST Robotics Factoids Tray Latch and AI Mode Selector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Team Custom Parts for the BEST Robotics 2025 game (Factoids). 2 TCPs that work together to perform 3 unique tasks.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Function and purpose of the part
This submission is for two team custom parts (TCP) that work together (and separately) to perform multiple tasks.
Part 1 is a multipurpose end effector for our robot arm that is designed to:
- manipulate the neural network mode selector
- lock and unlock our detachable tray
- facilitates simple interaction with connector tiles, WSD gate latches, and Tweeter tower activators.
Part 2 is a cylindrical latch that interfaces with part one to secure or release a detachable tray for the NN connector tiles.
How would it benefit a BEST robot?
These parts benefit a BEST robot by making high-value game tasks quicker, easier, and more reliable. Their design makes them extremely reliable and durable while providing functionality difficult to obtain with standard kit parts. By working together, they allow a robot to release tools once they are no longer needed and then perform tasks with the remaining parts on the robot.
Design process notes (iterations, testing, decisions)
All designs were created in Autodesk Inventor and printed with a layer height of 0.20 mm and organic tree supports when needed.
Part 1:
- Version 1
- Design started with a simple 4-prong device to reach into the selector box and turn the handle.
- Designed in CAD, but not printed.
- Version 2
- Part was redesigned to be sloped on the outside like a cone (to help with alignment in the selector box).
- Inside of the part was also sloped to help with alignment to the handle.
- Printed in PLA on Anycubit CHiron to test fit and effectiveness
- Version 3
- Once a detachable tray was desired, the original idea was modified to include locking tabs that could engage with a second TCP.
- V3 reverted to V1 and added tabs at the end of the prongs.
- This version was printed on a Prusa MK2 in PLA at 50% scale for proof of concept testing with the second TCP.
- Prototypes were simple, but proved the concept and justified further development.
- Version 4a
- Ideas from V2 and V3 were combined.
- The locking tabs were relocated to the outside of the prongs for better clearance with the selector handle.
- The inside of the part maintained some of the curvature of V2 to assist with handle alignment.
- Version 4b
- Mounting holes were added to ease assembly and to strengthen the part around the screw threads.
- Printed on Creality CR-10S Pro in PLA w/ 30% infill and 3 walls.
- This is the version that was tested on the robot at Mall Day (Demo Day).
- Part worked, but functional improvements were requested by the drivers.
- Version 5a
- Curvature between the prongs was changed to fit the handle more tightly and to beef up the base of the prongs.
- Slots were added to each prong so that they could be reinforced post-printing with piano wire secured with epoxy. This would strengthen the prongs and keep the part functional even if gameplay damaged the part and caused delamination.
- Printed on Creality CR-10S Pro in PLA w/ 30% infill and 3 walls.
- Tested on the robot between Mall Day and Game Day.
- Version 5b
- Supports had been added to the arm to brace the back side of this piece to keep impacts from breaking the servo horn. This version added a recessed ring to the back to promote alignment with these braces.
- A few fillets were added to make connecting the two TCPs easier.
- Printed in PLA on Bambu H2S (student printer).
- This version was used on Game Day.
- Version 5c
- A few additional fillets were added, some for cosmetic reasons, but one was specifically added to the rear edge to prevent the part from becoming stuck in the selector box during a poorly aligned attempt.
- Printed in PLA, Taulman Nylon 910, and ABS to test the effectiveness of different filaments
- PLA works fine as always, but prongs can delaminate with lateral impacts
- We got a new Creality K2plus a few days after the local competition and now had a working machine with a heated chamber. We could test some filament we had not considered before. (The previous machine was broken.)
- Our small tests in Nylon were too flexible, so we were skeptical. Fortunately, increased infill (50%) on a full-sized part was stiff enough. However, it unexpectedly delaminated as easily as the PLA. This might be due to the age of our Nylon filament (9 years, our coach thinks). Even after drying the filament, one print had layer issues that caused the piece to fail while removing it from the bed.
- At the local competition, someone recommended we try printing in ASA. After researching various filaments, we opted to try ABS as it has similar structural properties and we had some ABS already.
- First impressions of the ABS (3 walls at 50% infill) is that it is stronger, but we haven’t had time to thoroughly test it yet.
- Version 6
- Added a small hole through the outer shell for a bolt. The bolt protrudes out 1-2 cm and is used to trip the release of our arm extension
- Adjusted the curved opening between the prongs to better match the handle and to keep the TCP from inserting too far into the selector (to avoid problems with the added bolt catching on the box).
![]() | ![]() |
| TCP 1 engaged with the AI mode selector | |
![]() | ![]() |
| Drawing of TCP 1 | Prototypes of TCP 1 in Various Materials |
Part 2:
- Version 1 mates with part 1 - v3
- Simple cylindrical endcap with slots and overhanging tabs to latch onto the selector
- This version was printed on a Prusa MK2 in PLA at 50% scale for proof of concept testing with the second TCP.
- Prototypes were simple, but proved the concept and justified further development.
- Version 2
- Diameter increased and slots adjusted to work with the modified selector (part 1- v4)
- Printed on Creality CR-10S Pro in PLA w/ 30% infill and 3 walls.
- This is the version that was tested on the robot at Mall Day (Demo Day).
- Part worked, but functional improvements were requested by the drivers.
- Version 4a
- The slots for the locking tabs were extended 10 degrees so the locking tabs had a more secure connection.
- Mounting holes were added to increase strength and rigidity and to remove the need to drill mounting holes post-print.
- Chamfers were added to make connecting the two parts easier and quicker.
- Printed in PLA on Bambu H2S (student printer).
- This version was used on Game Day.
- Version 4b
- The major change was that the slots were adjusted so that the tray would unlock with a counterclockwise rotation. (It previously was clockwise.)
- Our practice selector box was misassembled with the A, B, and C in the incorrect orientation.
- We realized this very quickly during driver practice and the drivers adjusted. However, we want to fix this moving forward so the action is more intuitive.
- Added one additional fillet
- Added a portion of our team logo to the base between the mounting holes (just for looks).
- We have also printed this version in ABS and are testing it alongside part 1 - V5c.
- The major change was that the slots were adjusted so that the tray would unlock with a counterclockwise rotation. (It previously was clockwise.)
![]() | ![]() |
| TCP 2 on Tray | TCP 1 and TCP 2 Together |
![]() | ![]() |
| Drawing of TCP 2 | Prototypes of TCP 2 in Various Materials |
Print Settings(filament type, infill%, supports, orientation)
As noted above, this has changed quite often as we refined these designs. The print settings of our most recent version are:
| Filament: | ABS |
| Layer height: | 0.20 mm |
| Infill %: | 50% |
| Infill type: | 3D honeycomb |
| Supports: | tree - organic - on bed only |
| Orientation: | large cylindrical base on the bed |
| Other: | no raft, no brim, 1-loop/1-later skirt |
School Info:
DuBois Area High School
BEST Team 1425
Grove City College Hub








