Polygon Xquarone Tough Cable Grommets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable grommets which grip hoses and keep them still
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
Print in TPU 95a, solid using max perimeters
Post Processing: Yes - cut slots to press hoses into eyelets
If you run a different setup to my bike, mirror the models in the slicer to flip them between the left or right side of the headtube
Higher-end hydraulic brake hoses generally have a larger OD than shifter hoses. Here, the two hole headtube grommet has a large and a small eyelet to accommodate a brake hose and a shifter/dropper hose, respectively.
The nostrils insert into the downtube/seattube and rear triangle/swingarm, located near the cranks. Use the brake nostril for the left side of the bike and the shifter nostril for the right side.
The down tube grommets are very tight in the frame - this is intentional. Cut a slot to pop the hoses into the grommet, and use the tip of a strong tool, such as a flat-head screwdriver, to press the edges of the grommet into the frame, then use something blunt to press in until the outer face is flush. Take care not to damage the carbon fibre. Do not torque the screw excessively - the TPU will just crush.