1 / 5
Remixed Display Mount For Micron R1 by @HARTK1213
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the original display mount design by @HARTK1213 for the Micron R1.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a remix of the original display mount design by @HARTK1213 for the Micron R1. This will allow you to use a BTT 4.3-inch display HDMI version with USB touch on the current R1 printer.
Print Settings:
Standard recommended settings for the Micron R1 printed parts with organic/tree supports as shown.