SMSL RAW MDA-1 Vertical Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical stand for RAW MDA-1, available in both a single slide in piece, or a screwed in 2 piece.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a vertical stand I designed for SMSL RAW MDA-1 to save some table space, and adapt to my personalized speaker stands. I've modified the model to have slots for 4 25mm diameter rubber feet as anti-slip. I designed the model to be printed without supports. Model positions in slicer is attached in photos. There are 2 variants of this model:
- 1 piece, will let the unit slot into the stand from the front. It has minimal grip though, which can lead the unit to slide out when you pull a headphone cable from the front.
- 2 piece, which clamps the unit with a front cover piece, which helps the unit to stay in place. Requires 4 M3x10 countersunk screws.
I have printed this in eSUN PLA+ on a 0.4mm nozzle, and it does work fine in my environment (occasional sun exposure, tropical climate). This model can be remixed, and I provide the STEP files for you to do so. You can make modifications to adapt to your own desk management system, gridfinity slots (which I might do in the future), or change the screw size/type compatibility. I hope this model helps.