Gridfin Transport Box for Xsens Awinda Sensors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gripfin box up to 9 xsens awinda sensors (or 8 + the usb dongle)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
A transport box for Xsens Awinda motion capture sensors, inspired by Slant 3D, using a "gridfin" retention system.
Capacity: holds 9 sensors or 8 sensors + 1 sensor/USB dongle
Retention mechanism: the lid uses flexible fins sized slightly larger than the openings, so they deform slightly to grip and hold each part in place. There is a small amount of play around the sensors to prevent them from getting stuck during insertion or removal.
Design: fully parametric, additional box sizes/configurations can be generated on request
Files: OpenSCAD source will be released once finalized
Note: long-term creep in the fins (material relaxing over time under sustained deformation) can reduce grip strength, so retention may loosen with extended use.