Battery Dispensers D C AA AAA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Assembly is easy, but to keep the part simple to print when you put the two pieces together some sort of glue is…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 899
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
added C battery model 2026-03-31
Assembly is easy, but to keep the part simple to print when you put the two pieces together some sort of glue is recommended. I used two drops of superglue in the corners to hold the Ramp and Frame in position. May improve the design with clips if enough folks want something like this.
This is not parametric nor stackable at this time, I may also address those options as my skills improve.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
0%
Filament: Any Any Any
Notes:
Printing the Frame on the front face and the Ramp on its side means no supported needed. I do recommend a Brim is there is any concern with bed adhesion. I have used PLA, PETG and Silk PLA so far with no issues.
Category: Containers