Fireplace Mantle or Shelf Stocking Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stocking hook for hanging stockings from a shelf or fireplace mantle.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
This bedsidestocking hook has been designed from the ground up with 3D printing in mind.
A single piece stocking hook. Print on its side for best strength.
Printing and Assembly
The hook shown in photos was printed at 0.2mm layer heights using a 0.4mm Nozzle. It should print well with larger nozzles, although the crisp edges may become more rounded.
V1 is the version shown in the photo. V2 is a strengthened version included for heavier stockings or presents.
Based on your bed performance, a brim may be required to prevent warping.
I printed with 15% adaptive cubic infill and two walls and had great results. There is no requirement for supports.
Required Parts
No additional parts are required for this project.