1 / 2

Dummy13 150% Keyboard – Easy 3-Color Print

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TKL mechanical keyboard prop for 150% Dummy13, split in 2 parts for easy 3-color printing and simple slide-in assembly.

Aktualizacja u źródła: 22 lis 2025

Informacje o modelu

A compact tenkeyless (TKL) mechanical keyboard prop sized to match Dummy13 at 150%. Designed especially for easy 3-color printing and quick assembly.

Dummy13 150% scale
Sized to look natural in the hands or on the desk of a 150% Dummy13 figure.
3-color friendly layout
- Keycaps: up to 2 colors
- Body: 1 color
  You can get a 3-color mechanical keyboard look with only two printed parts.
Two-part construction
The model is split into 2 parts so it’s easy to print and easy to paint/replace. After printing, just slide one part into the groove of the other. No glue is required in normal use.
Minimal color-change overhead
Each part is designed so you need at most one mid-print color change (just swap filament from a certain layer). This keeps color-change time and filament purge loss to a minimum, even on AMS or manual color swaps.

This keyboard is an unofficial third-party accessory, created from scratch and includes no original Dummy13 geometry.