1 / 7
Adjustible Monitor Stand (60mm-110mm) — zdjęcie 1
1 / 7

Adjustible Monitor Stand (60mm-110mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

NOTE: Do Not Use the Completed Assembly STL; the parts must be printed separately This is a pretty large print, a 200m…

Ocena
0 / 5
Polubienia
8
Pobrania
28
Wydruki
0
Wyświetlenia
441
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

NOTE: Do Not Use the Completed Assembly STL; the parts must be printed separately

NOTE@: Improvements have been made to this since I imported from thingiverse…. I will address at some point (better turning handle, etc.)

This is a pretty large print, a 200m base and top plate. Could be broken up and glued together relatively easily.

Could easily be adjusted from about 60mm in height to around 110mm in height. Pretty stable but very basic design, not foolproof (there are no "stops" to prevent platform from going too high, or stopping the gears coming off their bases/pivots).

And my apologies for the terrible video quality; just grabbed an old iphone and did it in situ in my dining room.

Print Settings

Printer Brand:

Prusa

Printer: 

i3 MK3

Rafts:

Doesn't Matter

Supports: 

Doesn't Matter

Resolution:

0.2mm

Infill: 

20%

Filament: Monoprice PLA+ Black


 

Notes:

 

(note; this print struggled at 215C with MP PLA+, needed to drop it to around 200C to get to a cleaner print)

Post-Printing =============

 

 

 

Category: Office

Tagi