Novation Launchkey (Mk1) replacement for rubber pitchwheel and modwheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
That old rubber dried and started falling apart? Here's the solution :)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
I have this ‘old’ Novation Launchkey 49 (Mk1). As many other devices of the same age, the rubber parts on touch dried up and started falling apart.
You can easily remove the old rubber (even without taking apart the device), clean it with some alcol, print my model and put it in place (some superglue may be necessary but in my case they simply snapped in place).
2 models, without and with some grip carvings.
I used PLA+, printed with organic supports (see image). Quick and easy.
I guess it could also be printed in TPU but i didn't have any around so i didn't try.
Hope will be useful to somebody beside me :)