Screw for S-Box sufrace electric installation hermetic box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a special screw for hermetic, surface installation boxes (S-Box). Diameter about 6mm and untypical thread.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 82
- Wydruki
- 2
- Wyświetlenia
- 297
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I broke one of the screws for my electric installation box (S-Box) where I put some electronics to control my devices in garage (boiler room). The only way to get such screws is to buy a new box, so I decided to create an own one. The screw is (IMO) untypical with diameter about 6,2 mm and untypical thread.
To keep it strong, I recommend to print it with ASA. I printed with 0,1 mm layer and I used 10 perimeters, so it is fully filed inside with the circular pattern.
The screw is quite strong and it fits perfectly into the original box.