Photogrammetry Camera Mount Barracuda-FernCo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple way to connect a full-frame camera system and lights onto a Dive Xtras Barracuda DPV to support Photogrammetry.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Noncommercial
This part allows for a simple if not elegant way to connect the housing for a full-frame digital camera and lights to a Dive-xtras Barracuda Dive Propulsion Vehicle for use capturing high-resolution still images intended to be used to construct detailed 3D models of Large Objects.
The part supports mounting of TWO 1 inch ball mount adapters to allow for a pair of video lights. Also expect the Camera Housing to have a pair of 1 inch mounts and those should also be used for lighting (as needed).
This mount has been used to capture 3D Modeling Data (images) for more than a dozen shipwrecks (and counting). Models are published at https://www.3dshipwrecks.org.
The part mounts to the scooter nose using a Flexible Coupling:
FernCo Coupling (link to Amazon product)
The 1 inch ball mounts:
Ball Mount (link to Ultralight web site and product)
5mm Stainless Steel bolts and press-in fittings to mount these to the part.
NOTES:
PRINT SOLID. Leaving any significant void spaces within the shell of the part will result in issues after repeated use to any meaningful depths (≥10m)