1 / 1

Demon Slayer Tanjiro poster

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tanjiro hueforge

Aktualizacja u źródła: 22 lis 2025

Informacje o modelu

rint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.48mm

#0d1414 PLA Prusament Jet Black Transmission Distance: 0.1

#562309 PLA Elegoo Brown Transmission Distance: 1.7

#f11405 PLA Elegoo Red Transmission Distance: 4

#ff7f32 PLA Anycubic Orange Transmission Distance: 5.3

#009639 PLA Anycubic Green Transmission Distance: 2.2

#003594 PLA Anycubic Blue Transmission Distance: 2.7

#ffffff PLA Elegoo White Transmission Distance: 4.3

#f5ec00 PLA Elegoo Yellow Transmission Distance: 6

#fff2d5 PLA Elegoo Beige Transmission Distance: 2.5

This print uses 9 unique filaments

Swap Instructions:

Start with Jet Black

At layer #7 (0.64mm) swap to Brown

At layer #9 (0.8mm) swap to Red

At layer #11 (0.96mm) swap to Orange

At layer #14 (1.2mm) swap to Green

At layer #18 (1.52mm) swap to Blue

At layer #20 (1.68mm) swap to White

At layer #22 (1.84mm) swap to Yellow

At layer #24 (2mm) swap to Brown

At layer #26 (2.16mm) swap to Beige

At layer #29 (2.4mm) swap to White for the rest.